Video Player Guides

How to Stream Video From a Windows PC to Mac

Your video library lives on a Windows PC, but you want to watch it on the Mac in front of you. You do not need a USB drive or a long copy — stream the files over the network and watch them in seconds.

Download for Mac See the Mac player

Total Video Player for Mac — available on the Mac App Store.

A lot of people keep their real video library on a Windows PC — years of downloads, camera archives, recorded TV, and a stack of movies — and then find themselves in front of a Mac, wanting to watch something without dragging a drive across the room. The instinct is to copy the file, but a copy across the network is the slow, disk-filling way to do a thing the network was built to do directly. With the right setup, the Mac streams the video straight from the PC: the file stays on the Windows machine, the Mac only decodes what it needs, and the laptop's SSD never fills up. This guide walks through why streaming beats copying, which network methods reach a Windows PC from a Mac, how to open the shared files in a Mac player, how to cast that stream to a television, and the troubleshooting steps that clear up the usual connection problems.

Why Stream From a Windows PC to a Mac Instead of Copying

The reason most people reach for a copy is habit. For years, moving a file from one computer to another meant physically moving it, and the muscle memory stuck even after the network made that unnecessary. But copying a video from a PC to a Mac carries a real cost, and the bigger the library, the worse it gets. A single 4K film can be tens of gigabytes, a camera archive can be hundreds, and every copy is a wait plus a deduction from the Mac's small SSD.

Streaming removes both costs at once. The Mac reads the file across the network as it plays, so there is no wait for a transfer to finish before the first frame appears, and nothing is written to the Mac's disk during playback. After you stop watching, there is no cleanup chore — no file to delete, no "where did that copy go" to track down. The PC remains the single home of the library, and the Mac becomes a window into it rather than a duplicate of it.

There is also a simplicity argument. A home with both a Windows PC and a Mac usually already has the network plumbing in place — the same Wi-Fi or Ethernet that shares a printer and backs up phones is perfectly capable of sharing a video folder. The only missing piece is a Mac player that knows how to reach a Windows share and play from it directly. Once that piece is in place, "watch the thing on the PC" and "watch the thing on the Mac" become the same action in the same app, and the question of which machine holds the file stops mattering.

The one-sentence version

Share the PC's video folder, open it from the Mac over the network, and play — the file stays on the Windows machine, the Mac's storage stays empty, and nothing is copied before playback begins.

The Easy Path: Windows File Sharing (SMB)

Windows File Sharing — the protocol is called SMB, sometimes Samba — is the natural first choice because it is already running on virtually every Windows PC. Turn on file and printer sharing, pick a folder, and the PC advertises that folder to other machines on the network. macOS has spoken SMB for many years through its built-in Connect to Server window, so the Mac sees the PC as a network location almost without any setup.

From the Mac's side, the flow is familiar. You point the Connect to Server dialog at the PC — something like smb://DESKTOP-NAME or an IP address — authenticate with a real Windows username and password, and the shared folder mounts on the desktop like any other disk. At that point a Mac player that browses network volumes can open the video directly. The player reads the container and decodes the streams across the network, so a large recording on the PC behaves like a local file without ever being copied to the Mac.

The reason SMB is worth leading with is that it needs no extra software on either end. Windows ships with it enabled, macOS ships with a client for it, and the only configuration is deciding which folder to share and who may open it. For the typical household — one Windows PC, one Mac, a shared Wi-Fi network — SMB is the ninety-percent solution, and it is the method the rest of this guide uses as the baseline. The other protocols below are there for the cases where SMB is awkward, not because SMB is hard.

Other Ways to Reach the PC: SFTP, FTP, and WebDAV

SMB is the default, but it is not the only way a Mac can pull video from a Windows PC, and there are situations where a different protocol is cleaner. SFTP, FTP, and WebDAV all work by running a small server on the PC that exposes a folder, then letting the Mac connect as a client. None of them require installing the Mac player's sibling app on Windows; they only require a standard, often free, server program.

SFTP is the secure cousin of FTP and rides on the same SSH foundation many power users already have. FTP is the oldest and most universally supported, handy when the PC sits somewhere unusual or the network is locked down. WebDAV presents the folder like a cloud drive and is easy to poke through from any client that understands it. The practical difference between them is mostly about what the PC already runs and how much setup you are willing to do — the Mac player simply needs to log in and list the files.

This matters for the "PC to Mac" scenario specifically because the PC is the source of truth. With SMB the PC shares natively; with SFTP, FTP, or WebDAV the PC runs a tiny server that the Mac reaches over the same network. The Mac player described in this guide connects to SMB, SFTP, FTP, and WebDAV alike, so you are not forced into one method. If a Windows share is blocked by policy on a corporate network but an internal WebDAV server is allowed, the file still reaches the Mac — the protocol is a detail, and the watching is the same. The WebDAV playback guide goes deeper on the WebDAV side of this same story.

How to Stream Video From a Windows PC to Your Mac (Step by Step)

The setup is short, and after the first time it is no more work than opening a file from Downloads. Here is the workflow in Total Video Player for Mac, the player this guide describes, using Windows File Sharing as the example.

  1. Share the folder on the Windows PC

    Right-click the video folder in File Explorer, open Properties, switch to the Sharing tab, and choose to share it with your user account or with Everyone on the network. Note the PC name or its local IP address — you will type it on the Mac. Make sure network discovery and file sharing are turned on in the Windows network settings.

  2. Open the player's network browser on the Mac

    In the player, open the location that lists your Mac and connected servers. Choose to add a network source and enter the PC as an SMB share — the host name or IP plus the shared folder. Nothing has been copied to your Mac yet; you are looking at the PC's contents through the player.

  3. Authenticate with your Windows credentials

    Enter the Windows username and password for an account that can read the shared folder. The player stores the connection so the folder appears on the list of network sources next time, and the PC shows up as a readable location alongside your local disks.

  4. Navigate to the video and play it

    Browse the shared folder, find the file, and double-click it or select it and press play. The player reads the container across the network, decodes the streams, and begins playback right away. Because it streams from the PC, a 30 GB recording starts in moments and your internal drive stays untouched.

  5. Adjust audio, subtitles, and speed as needed

    Switch audio tracks, load an external subtitle file and style it, change playback speed up to 10x for a long recording, or set an A-B loop. These controls work identically whether the file is on the PC or on the Mac, because the player treats both sources the same once they are mounted. A clip on the network is as manipulable as a clip in your Movies folder.

  6. Send it to the television when you want the big screen

    Open the cast menu and pick the target: an Apple TV over AirPlay, a Chromecast device, or a DLNA-capable television or receiver. The Mac keeps decoding from the PC; the picture goes to the TV. The file never lands on the Mac's disk, so a recording on the Windows machine flows straight to the big screen.

The whole point is that the PC location stops being a special case. After the first connection, "play the video from the PC" and "play the video from Downloads" are the same action in the same window. You stop managing where files live and start choosing what to watch, which is the reason the network exists in the first place.

Which Method Should You Use to Reach the PC?

All four common methods move the same bytes, so the choice is about what the PC already offers and how much setup you want. The table below maps each method to its strengths and the situation where it fits best.

Method Built into Windows? Setup on PC Best when
SMB (Windows File Sharing) Yes Share a folder; turn on discovery The PC is a normal home or office machine on the same network
SFTP Needs a server Install a small SSH/SFTP server You already run SSH, or want encrypted transfer
FTP Needs a server Install a small FTP server Maximum compatibility with locked-down networks
WebDAV Needs a server Enable an IIS or third-party WebDAV server A cloud-drive style mount is preferred, or SMB is blocked

For almost everyone, SMB is the answer, and the other three are fallbacks for networks where SMB is turned off or filtered. The Mac player reaches all four, so you are never stuck because a file is "on the wrong computer" — only because a share is not yet enabled. Our NAS video player guide covers the same network-browsing idea when the library moves to a dedicated server instead of a PC, and the pattern is identical: connect, browse, play.

Casting the Streamed Video to Your TV

A video library on a Windows PC is usually the largest collection a household owns, which is exactly the collection people most want on the television. The obstacle is that smart TVs and streaming boxes are picky about format and source: plug a drive in or point them at a share and they list MP4 and MOV while ignoring MKV, AVI, or WMV, and they have no idea what to do with a high-bitrate 4K file. The Mac sidesteps all of that, because the Mac does the decoding and simply sends a finished picture to the screen.

Three protocols cover almost every television you might own, and the player handles all three in one place. Apple AirPlay reaches Apple TV and AirPlay-compatible televisions and is the smoothest path if you already use that ecosystem. Chromecast covers Google's dongles and the large family of Chromecast-enabled televisions from other brands. DLNA covers DLNA-certified televisions, receivers, and media players — the language most generic smart TVs speak. Because the Mac is decoding the PC stream locally and forwarding the result, the television only has to accept a stream, so the format of the original file and the fact that it lives on a PC both stop being the TV's problem.

This matters specifically for a streamed file because the file never lands on the Mac's disk. You open a recording that lives on the PC, cast it, and the stream flows from PC to Mac to television. Nothing is copied, nothing is converted, and when you stop, there is no cleanup and no SSD tax. For anyone who has ever copied a 30 GB file just to watch it once in the living room, that workflow change is the whole reason to set up PC streaming in the first place. The cast video from Mac to TV guide goes deeper on sending any source to a bigger screen.

When the Streamed File Meets the Rest of Your Library

A Windows PC and a NAS or external drive are just two ways to solve the same problem — keeping the library off the Mac's internal disk. They are not mutually exclusive, and a player that reaches all of them lets you treat them as one library. The PC is the machine with the big existing archive; the NAS or WebDAV server is the always-on copy; the external drive is the portable copy. Total Video Player for Mac can open files from a Windows share and from SMB, NFS, SFTP, FTP, and WebDAV sources, so the same player that reads your PC also reaches the server in the basement and the disk on your desk.

In practice this means you are never stuck because a file is "in the wrong place." A clip on the PC plays the same way as a clip on the NAS, and a recording you shot on the road lives on the portable disk until you get home and drop it on the server. The Mac becomes the single window into every video source you own, local or remote, and the question of where something is stored stops shaping how you watch it. That flexibility is the quiet payoff of using one player for everything rather than a different tool per location.

For very large libraries, the combination is powerful. Keep the working set on the fast external SSD for travel and the full archive on the Windows PC or the NAS at home, and open either from the same window. Playlists, A-B loops, and screenshot capture all work on streamed files just as they do on local ones, so a clip coming over the network is as useful for clipping a moment or looping a passage as a clip in your Movies folder. You can queue a PC recording, a NAS movie, and a local clip into one playlist and let them play in order — the source is invisible once playback starts.

Troubleshooting PC-to-Mac Streaming on Mac

When streaming from a Windows PC misbehaves, the cause is usually one of a small set of things. Walk through these before assuming the PC, the network, or the player is broken.

The Mac cannot see the Windows PC at all

Start with the network. Both machines must be on the same local network and, on most home routers, the same Wi-Fi band or VLAN; an isolated guest network will hide the PC from the Mac. Confirm on the PC that network discovery and file sharing are enabled and that the folder is actually shared with the account you are using. Try the PC's IP address instead of its name, because name resolution can fail while the address still works. A wired connection to the same router is the fastest way to rule out Wi-Fi isolation.

The connection is rejected even with the right password

Windows may require a full account name in the form PCNAME\username, and it may block blank passwords or accounts that have never signed in locally. Make sure the account you are using has a password and read access to the shared folder, and that the Windows firewall is allowing file and printer sharing on private networks. If the PC belongs to a domain, use the domain credentials rather than a local one. A denied connection is almost always a permissions or firewall detail, not a protocol failure.

Playback starts but stutters or drops frames

This is throughput, not format. A 4K H.264 or H.265 file streamed over a weak Wi-Fi link can outrun the connection, just as a file on a slow external disk can. Move both machines onto the same fast Wi-Fi or, better, onto Ethernet, and close other transfers saturating the link. On Apple Silicon the decode itself runs on the media engine, so when the network keeps up, a high-resolution file from the PC plays as smoothly as a local one. If the same file plays from the Mac's disk but stutters from the PC, the network is the variable to address.

The file opens but there is no sound

Streaming changes where the file lives, not what is inside it. No audio means the audio codec is outside the supported set, so compare the track against MP3, AAC, AC3, FLAC, WAV, WMA, OGG, and M4A. A multi-track file may also have defaulted to the wrong stream; switch audio tracks from the playback menu while the video runs, and the network source makes no difference to which tracks are present. The PC's shared folder exposes the same audio the file always had.

The file will not open at all from the share

If the share mounts and other files open, the problem is the container, not the network. A player built for broad formats reads MP4, MKV, MOV, AVI, M4V, MPEG, WMV, FLV, WebM, MTS, M2TS, and TS, plus the audio inside them, so a file QuickTime refuses will still open here. A genuinely corrupt download is the rare exception; try a different copy of the same title to confirm. The share is working if smaller files in the same folder already play.

Frequently Asked Questions About Streaming From a PC to Mac

Can I stream video from a Windows PC to a Mac without copying it?

Yes. When the PC shares its video folder over the network, the Mac player connects to that share and reads the file across the network while it plays. Nothing is written to the Mac's internal disk, so a 30 GB recording on the PC behaves like a local file without ever landing on the laptop. The player decodes the stream as it arrives, so playback begins quickly and the Mac's SSD stays exactly as full as it was before you pressed play.

Which network protocol is best for reaching a Windows PC from a Mac?

Windows File Sharing, also called SMB, is the easiest because it is built into every modern version of Windows and macOS connects to it directly through the network browser. For a PC that is not on the same workgroup, or for a more controlled setup, SFTP, FTP, or WebDAV also work well once a small server is running on the PC. The player described in this guide reaches all of SMB, SFTP, FTP, and WebDAV, so you can pick whichever the PC already offers rather than installing new software.

Does Windows File Sharing (SMB) work between a Windows PC and a Mac?

Yes. Windows enables file and printer sharing on the local network by default, and macOS has connected to SMB shares for years through its built-in Connect to Server window. The Mac sees the PC as a network location, authenticates with the Windows username and password, and then treats the shared folder like any other disk. A capable Mac video player reads video straight from that mounted share, so the file plays from the PC without a copy.

Can I play MKV and other non-QuickTime formats streamed from the PC?

Yes. A video library kept on a Windows PC is usually a mix of formats — MKV, MP4, AVI, MOV, WMV, FLV, WebM, MTS, M2TS, and TS among them — because Windows apps open all of those. QuickTime on the Mac will refuse most of them, which is why streaming them is only half the battle. A Mac player built for broad container support opens the streamed files directly and also decodes the audio inside them, including MP3, AAC, AC3, FLAC, WAV, WMA, OGG, and M4A, so a mixed collection plays from one window.

Can I cast the video I streamed from the PC to my TV?

Yes. Once a file from the PC is playing on the Mac, the Mac can send the picture to a television over AirPlay to an Apple TV or AirPlay television, Chromecast to a Google dongle or Chromecast-enabled television, or DLNA to a DLNA-certified television or receiver. The Mac does the decoding of the PC stream, so the television only receives a finished picture and never has to understand the network share or the codec. The file stays on the PC the entire time.

Do I need the same app installed on the Windows PC?

No. To stream video from a Windows PC to a Mac you only need the Mac player and a standard sharing method already available on Windows — SMB file sharing is on by default, and SFTP, FTP, or WebDAV servers are small, free additions if you prefer them. You do not install anything on the PC specifically for this workflow, and the PC does not need a video player of its own installed to share files; it only needs to expose the folder to the network. The Mac connects, browses, and plays.

Why won't my Mac connect to the Windows share?

Most connection failures come from a small set of causes. The PC may have network discovery or file sharing turned off, the two machines may be on different Wi-Fi networks or VLANs that block local traffic, the Windows firewall may be blocking file and printer sharing, or the username and password may not match a real Windows account. Confirm the share is enabled, put both devices on the same network, allow file sharing through the firewall, and use the exact Windows credentials. Once connected, the folder appears as a network disk the Mac player can browse.

Is Total Video Player for Mac the same as Total Video Player Pro for Mac?

They are two related apps from the same family. The standard edition covers local playback, network playback over SMB, NFS, SFTP, FTP, and WebDAV, casting to AirPlay, Chromecast, and DLNA, dual subtitles, and playback speeds up to 10x, and it is the edition described in this guide. Total Video Player Pro for Mac has its own product page where the two feature sets can be compared side by side before you decide which one fits your workflow.

Watching the PC Library Without the Copy-and-Delete Dance

The friction around PC-to-Mac video comes from a gap, not a flaw: the PC stores beautifully and the Mac plays beautifully, but the default tools never shipped the middle step that lets one stream from the other without a detour through a local copy. Once a Mac player that reaches Windows shares directly is in place, that gap closes, and the awkward routine of sharing, copying, watching, and deleting disappears. The files you actually keep — MP4, MKV, MOV, AVI, M4V, MPEG, WMV, FLV, WebM, MTS, M2TS, TS — all open from the same window, and the audio inside them plays too, whether it is MP3, AAC, AC3, FLAC, WAV, WMA, OGG, or M4A.

What makes the setup worth keeping is everything around the playback itself. Decoding that keeps your Mac drive empty. Hardware-accelerated 4K H.264 and H.265 on Apple Silicon, so high-resolution files from the PC stay cool and quiet. Casting over AirPlay, Chromecast, and DLNA so the biggest file in the house reaches the biggest screen. Dual subtitles for bilingual viewing, subtitle styling that makes text readable on any scene, speeds up to 10x for long recordings, rotate and mirror for sideways footage, playlists, A-B loop, and screenshot capture. The same app can also reach a NAS or WebDAV server, so the Windows PC and the home server become one library.

That is the whole idea behind the positioning: play locally, stream from your network, cast to the big screen. Share the PC folder, and your Windows video collection stops being a thing you copy and becomes a thing you just watch — from the Mac, on the TV, anywhere the network reaches. Which, after all, is what you built the network for.

Watch Your Windows PC Library on Your Mac

Total Video Player for Mac streams video from a Windows PC over SMB, SFTP, FTP, and WebDAV — with 4K hardware decoding, dual subtitles, and casting to AirPlay, Chromecast, and DLNA. Available on the Mac App Store.