Video Player Guides

Elmedia Alternative for Mac: Play Local Video and Cast It

Elmedia Player is one of the few Mac players that casts to AirPlay, Chromecast, DLNA, and Roku — which is exactly why people install it. The catch is not the feature list. It is the edition structure, the five-minute cap on streaming in the standard build, and the fact that the comfort features sit behind a PRO licence. Here is the honest comparison.

Download for Mac See the Mac player

Total Video Player for Mac. Apple Silicon and Intel.

Most "alternative" pages are written backwards: they decide the conclusion first and then go looking for evidence. This one starts from the opposite direction, because Elmedia Player is a genuinely good Mac app and pretending otherwise would be both dishonest and useless to you. Elmedia plays an enormous range of formats, it casts to AirPlay, Chromecast, DLNA, and Roku, it can transcode on the fly while casting, and its subtitle toolkit — appearance controls, OpenSubtitles search, delay adjustment — is better than what most Mac players offer. If you already run the PRO edition and it does what you need, there is nothing on this page that should persuade you to uninstall it. What this page is actually for is the much narrower question that brings people here in the first place: you tried the standard edition, started a film on the television, watched it stop after a few minutes, and went looking for something that would just keep playing. Or you want a Mac that publishes its library to the television instead of only pushing to it. Or your files live on a NAS and you would rather not copy them to the desktop first. Those are the gaps worth talking about, and they are narrower and more specific than "which player is best". Below is what Elmedia does well, where the workflow frays, a side-by-side table that compares the editions rather than just the app, a checklist to run with your own files, and a migration that takes about ten minutes.

Why People Search for an Elmedia Alternative on Mac

The first reason is the one almost nobody writes down: the streaming cap. Elmedia's own comparison of its editions states that the free build of the player lets you stream video and audio to AirPlay, Chromecast, and DLNA-enabled devices for five minutes only, and that unlimited streaming requires the PRO upgrade. Five minutes is long enough to prove the feature works and short enough to ruin a film. A viewer who has just settled onto the sofa, confirmed that the picture reaches the television, and then watches playback halt has not encountered a bug — the app is behaving exactly as documented — but they have encountered a decision point, and the search box is where a lot of people go to think about it.

The second reason is the edition matrix, which is more complicated than most people expect from a video player. Elmedia exists as a website edition in a standard and a PRO tier, and also on the Mac App Store as a universal player, a free app, and a separate PRO app. The streaming rows behave differently across those five columns, which means two people comparing notes about "Elmedia" can be describing two different products. That is not unique to this developer, and the site is transparent about it, but it does mean that a purchase decision needs a look at the feature table before the card comes out rather than after.

The third reason is workflow shape. Elmedia is library-first: its own instructions describe adding files to an internal library by browsing, by drag and drop, or through "Open With", and then playing from there. For someone who watches a handful of downloads a week that is perfectly pleasant, and the library brings bookmarks and playlists with it. For someone whose films live on a NAS with a folder structure they already trust, importing is an extra step that has to be repeated every time a file arrives, and it is not obvious what the library does when the underlying file moves.

The fourth reason is the one that sends people to pages like this one rather than to a support forum: the combination of a large screen and a small set of requirements that no single app seems to cover. A household wants a file played from the NAS, subtitles in two languages at once so a student can follow along, playback at a speed above the usual, a still frame saved for a slide, and the whole thing on a television that only speaks DLNA. Elmedia covers a lot of that ground, some of it only with PRO. The question worth asking is which parts of the ground matter to you, and whether the app you pay for should be organised around the file or around the screen at the other end of the room.

The honest one-line summary

Elmedia Player with PRO is the better choice if you want the widest format list on macOS, an audio equalizer, subtitle delay controls, and casting to Roku — and you are happy to buy a licence to get the casting uncapped. Total Video Player for Mac is the better choice if you want casting that is part of the app rather than an upgrade, a DLNA media server so the television can browse the Mac, network-share playback without copying files, and two subtitle tracks on screen at once.

What Elmedia Player Genuinely Does Well on Mac

Start with format coverage, because it is unusually broad and it is the reason the app has a following. The documented list runs through MP4, MOV, MKV, AVI, MPEG, WMV, FLV, 3GP, M4V, RMVB, TS, VOB, MXF, DAT, MTS, ASF, SWF, and WebM on the video side, with MP3, WAV, AC3, WMA, FLAC, and AAC on the audio side, and subtitle support spanning SRT, ASS, SSA, SMIL, SUB, IDX, SMI, and plain text. Two of those deserve a mention because almost nothing else on macOS handles them: SWF playback and VOB from a disc rip. If your archive includes Flash-era files or DVD folder structures, that coverage is worth real money, and no comparison table should bury it.

Casting is the second strength, and it is broader than most rivals. Elmedia sends local files to AirPlay devices including Apple TV and AirPlay-enabled televisions, to Chromecast and Google Cast devices including Android TV, to DLNA renderers such as Samsung, LG, Sony, and Panasonic televisions, and to Roku players and Roku-based televisions. It handles 4K output to devices that accept it, it transcodes on the fly when the receiver will not take the original file, it keeps the Mac as a remote control while the film plays on the television, and it will stream a saved playlist rather than one file at a time. It can also work in the other direction and act as an AirPlay receiver for audio, which is a neat trick for sending a phone's music to a Mac connected to better speakers. That is a serious casting feature set, and it is fair to say that Total Video Player for Mac does not cover Roku output or AirPlay reception.

Subtitles are the third, and here the app is stronger than most. Beyond loading internal and external tracks, Elmedia lets you change the font, encoding, colour, and position of the caption, adjust a subtitle delay to pull a track back into sync, search OpenSubtitles from inside the player, and — with PRO — save a found track for later. Encoding matters more than people expect: a legacy SRT authored in a Windows code page shows as mojibake in players that assume UTF-8, and having a control for it saves an evening. Total Video Player for Mac offers dual tracks with independent font, size, colour, and position, which Elmedia's documentation does not describe doing simultaneously, but it does not document an encoding override or a subtitle delay slider either. If your library is full of awkward subtitle files, that is a real point in Elmedia's favour.

Then there is the audio and video tooling, which is where the app starts to look like a small studio rather than a viewer. A ten-band equalizer with presets, AC3 and DTS output over S/PDIF for a receiver, a video tuner for brightness, saturation, contrast, and gamma, deinterlacing for old camcorder and security footage, aspect-ratio control, picture-in-picture, bookmark export and import, a timeline preview thumbnail on hover, and Touch Bar support on MacBook Pro models. Some of that is PRO-only, and all of it is documented. Total Video Player for Mac deliberately does not compete here: it offers playback speed up to ten times, rotate and mirror, playlists, A-B loop, and a screenshot, and it leaves equalizers and gamma curves to other software. Knowing which list describes your habits is most of the buying decision.

Where the Elmedia Experience Gets Complicated on Mac

The complication is not quality, it is packaging. Read the developer's own feature table and a pattern appears: the standard edition plays files well, and the features that make a player comfortable — screenshots and image sequences, A-B loop, rotate, flip and mirror, deinterlacing, brightness and contrast adjustment, the ten-band equalizer and its presets, exporting bookmarks, saving subtitle tracks found online, picture-in-picture, and choosing which monitor fullscreen lands on — are listed as PRO. Streaming to AirPlay, Chromecast, DLNA, and Roku is also listed as PRO, with the five-minute allowance in the standard build as a demonstration. None of this is hidden or unfair. It is, however, a different shape of purchase from an app that simply does the work when you install it, and it is the shape most often complained about in reviews of the app.

The second complication is the App Store split. The website edition and the Mac App Store edition are not the same product, and neither are the two App Store listings: the developer's comparison shows streaming available in one App Store build and absent from the free App Store build, with a separate PRO purchase for the other. There is also a documented exception on screenshots for VOB playback in App Store builds, for copyright reasons. If you are advising a family member over the phone, "install Elmedia" is not a complete instruction any more; it needs a tier and a store attached to it. That is a support cost, not a technical flaw, but it is real.

The third complication is the one that matters most for a living room: Elmedia sends to devices, and it does not document publishing the Mac as a source. Those are different jobs. Casting is a push: the Mac decodes or transcodes a file and hands a stream to a receiver it can see. A media server is a pull: the Mac announces a catalogue on the network, and the television browses folders with its own remote, no laptop involved. Elmedia's documentation describes AirPlay, Chromecast, DLNA, and Roku output — the push — and does not describe a DLNA Media Server, so a household that wants to switch the television on and browse without opening a laptop is looking at a different category of tool. Total Video Player for Mac ships that server, which is why it appears on this page at all.

The fourth complication is network shape. Elmedia is built around local files and its library, plus an "Open Online Video" route for web sources that is listed as PRO. What its feature pages do not document is browsing a NAS over SMB, NFS, SFTP, FTP, or WebDAV from inside the player. For a library that lives on a Synology or a QNAP, that usually means mounting the share in Finder and treating it as a local path, or copying the file down first — and a forty-gigabyte remux is not something you copy casually. Total Video Player for Mac connects to those shares directly, so the file stays where it is and the decoder reads across the network.

The fifth complication is subtitles in pairs. Language learners and households with mixed first languages want the source line and the translation on screen at the same time, styled differently so the eye can tell them apart. Elmedia documents appearance controls for a track and a delay adjustment, but not two tracks rendered simultaneously. Total Video Player for Mac does exactly that, with independent font, size, colour, and position per track, which is why it keeps turning up in language-learning setups. And the sixth is speed: Elmedia documents playback speed control without publishing a range, whereas Total Video Player documents up to ten times, which is the difference between skimming a lecture and actually getting through a conference recording.

Elmedia Player vs Total Video Player for Mac: Side-by-Side Table

The table below splits Elmedia into its two practical states, because the app behaves differently depending on whether a PRO licence is present. Where a capability is genuinely not part of a product's documented feature set, the cell says "not documented" instead of asserting what happens inside the app. Nothing here is meant to suggest that one developer is careless; the columns simply describe what each product says about itself.

Capability Elmedia Player PRO Elmedia Player, no PRO Total Video Player for Mac
MP4, MKV, MOV, AVI, WMV, FLV, WebM, MTS, TS playback Yes Yes Yes
Unusual containers (SWF, VOB, MXF, 3GP, RMVB) Yes — a standout strength Yes Not documented
4K UHD hardware decoding (H.264 / HEVC) Yes — hardware acceleration documented Yes Yes — media engine on Apple Silicon
Cast to AirPlay / Apple TV Yes — uncapped Five minutes per session Yes
Cast to Chromecast / Android TV Yes — uncapped Five minutes per session Yes
Cast to DLNA televisions Yes — uncapped Five minutes per session Yes
Cast to Roku Yes Five minutes per session Not documented
4K casting with live transcoding Yes Requires PRO Yes — capped by what the receiver accepts
DLNA Media Server (television browses the Mac) Not documented Not documented Yes — built in
Play from SMB / NFS / SFTP / FTP / WebDAV shares Not documented Not documented Yes — all five
Two subtitle tracks on screen at once One track documented One track documented Yes — independent font, size, colour, position
Subtitle delay and encoding controls Yes Delay documented; saving tracks requires PRO Not documented
Online subtitle search (OpenSubtitles) Yes Yes — saving tracks requires PRO Not documented
Playback speed Adjustable — range not published Adjustable — range not published Up to 10x
Screenshot from the video Yes — plus image sequences Requires PRO Yes
A-B loop, rotate, mirror Yes Requires PRO Yes
Equalizer, audio delay, video tuner, deinterlace Yes — a standout strength Requires PRO Not documented
Picture-in-picture, Touch Bar, timeline preview Yes PiP requires PRO Not documented

Read down the Elmedia columns first, because they tell you something a single "Elmedia" column would hide: the app in its standard state is a very capable file player, and the list of things a person actually reaches for during an evening — screenshot, loop, rotate, equalizer, picture-in-picture — is the list that needs a licence. Then read the last column. Total Video Player for Mac is narrower on format oddities and audio tooling and broader on delivery: three cast protocols, a media server, five network protocols, dual subtitles, and the everyday controls with no tier in between. VLC, for completeness, remains the format-tolerance champion and costs nothing, which is why so many Macs keep it installed as a second opinion, and it offers renderer support that varies by build and network rather than a clean cast menu. Our VLC alternative guide compares that side of the market in more depth.

Five Things to Test Before You Switch Players on Mac

Switching players is cheap. Switching and being disappointed is not, particularly if you have just paid for a licence somewhere. Test these five things with your own files and your own television, because a feature table can tell you what exists but only your library can tell you whether it matters.

  1. Time a cast longer than five minutes

    This is the test that decides the question for most people reading this page. Start a film, let it run past the point where the standard edition's allowance ends, and watch what happens. If playback stops and an upgrade prompt appears, you have found the difference between a demonstration and a feature. Do the timing on the television you actually use, not on a phone, because a receiver that drops the connection mid-stream can disguise itself as a session limit.

  2. Open the awkward file, not the sample clip

    The 4K HEVC file from a phone, the MKV with three audio tracks, the MTS from a camcorder, the VOB folder from a disc rip. Elmedia's advantage here is real and worth acknowledging: if your library leans on SWF, VOB, or MXF, it has coverage that Total Video Player for Mac does not document, and that settles the question in Elmedia's favour. Total Video Player reads MP4, MKV, MOV, AVI, M4V, MPEG, WMV, FLV, WebM, MTS, M2TS, and TS, which covers most libraries — but "most" is not "all", so test.

  3. Watch the CPU figure during 4K playback

    Open Activity Monitor next to the player and look at the percentage while a 4K file runs. Hardware decoding keeps it modest; a software fallback pushes it into the hundreds and the fan follows. Both apps document hardware acceleration, so this is a test of your file profile rather than of the app. If a specific file falls outside what the media engine supports, every player on the Mac will fall back, and the useful next step is our guide to diagnosing choppy 4K playback rather than a different download.

  4. Point the player at your network library

    Try to open a file that lives on the NAS, from inside the player, without mounting the share in Finder first. This is the quiet difference between a local player and a network player, and it is the one that decides whether a forty-gigabyte remux ever gets watched. If your library is on a share, our NAS video player guide covers the protocol side of that connection.

  5. Load two subtitle tracks at once

    If anyone in the house watches with the source language and a translation on screen together, load both tracks and see whether both render. Styling them apart — one smaller, one in a different colour, one moved up — is the difference between a study aid and a wall of text. Our dual subtitles guide walks through the setup if you want the detail.

How to Move Your Setup Over in About Ten Minutes on Mac

If the tests point at Total Video Player for Mac, the migration is deliberately boring. A player is a viewer, not a library manager, so there is no import step, no database to rebuild, and no metadata to lose. Nothing about your files changes.

  1. Install from the Mac App Store

    The app ships as a standard Mac App Store download and runs natively on Apple Silicon and Intel. There is no codec pack and no helper process to configure: the decoders, including the 4K UHD H.264 and H.265 hardware path, are inside the app.

  2. Open the file you tested during the checklist

    Start with the awkward one rather than the tidiest. If it played in Elmedia, it should play here; if it did not, this is the moment to find out, while you still have the other app installed and can compare side by side.

  3. Add the network source once

    Connect the NAS or shared folder over SMB, NFS, SFTP, FTP, or WebDAV. Once it is connected, files on the server play as if they were local, which is what makes the television workflow practical — nothing is copied to the desktop first.

  4. Add the television, using the protocol it speaks

    AirPlay for an Apple TV or an AirPlay-licensed set, Chromecast for a Chromecast or Android TV device, DLNA for the renderer built into most smart televisions. If you would rather browse from the sofa than cast from the laptop, switch on the DLNA Media Server and pick the Mac as a source on the television instead. Our DLNA media server guide covers that setup end to end.

  5. Rebuild the comfort settings

    Load the subtitle tracks and set font, size, colour, and position per track; queue a season in a playlist so episodes run in order; set playback speed if you watch lectures faster than they were delivered; set an A-B loop if you are drilling a passage. This is the step that takes two minutes and makes the app feel like yours.

  6. Keep the old app installed for a week

    Do not uninstall Elmedia on day one. Run them in parallel for a week and notice which one you reach for without thinking. That reflex is better evidence than any table, including the one above.

What you give up in the trade is real but narrow, and worth naming plainly: the equalizer, AC3 and DTS output over S/PDIF, the video tuner, deinterlacing, subtitle delay and encoding controls, OpenSubtitles search, picture-in-picture, Roku output, and AirPlay reception have no direct equivalent here. If any of those is central to how you watch, the right answer is not to switch — it is to buy the licence you were already considering. What you gain is a single app that can take a file from a network share, decode it in hardware at 4K, and put it on whichever screen in the house will accept it, with two subtitle tracks if you need them, without a session clock running.

Who Should Stay With Elmedia Player on Mac

This section exists because a comparison that concludes "switch" for everyone is not a comparison, it is an advertisement. Stay with Elmedia Player, and pay for PRO if you have not already, if your library contains SWF, VOB, or MXF files — that coverage is not something the alternative documents, and converting a disc rip is a worse use of an evening than buying software that opens it. Stay if the equalizer, the audio delay slider, or AC3 and DTS passthrough to a receiver are part of your listening setup, because a player that ignores your amplifier is the wrong player no matter how well it casts.

Stay if subtitle work is the centre of your viewing: encoding overrides for legacy files, a delay slider to rescue a track that drifts, and OpenSubtitles search from inside the player are a genuinely better toolkit than dual tracks alone, and they are documented features rather than lucky guesses. Stay if anyone in the house casts to a Roku, since that is a protocol Total Video Player for Mac does not document. And stay if you want the Mac to receive AirPlay audio from a phone, which Elmedia does and the alternative does not claim to.

Consider switching if the sentence "it plays beautifully until the five minutes are up" describes your week, or if the television in the living room is a DLNA-only set and you would rather browse it with its own remote than keep a laptop open on the arm of the sofa. Consider it too if your films live on a NAS and you are tired of copying them down, or if two subtitle tracks at once is the feature that would actually change how someone in the house watches. Those are specific, testable reasons, and the checklist above exists to confirm them before you spend anything.

Running Both Players on the Same Mac

There is no rule that says a Mac can have one video player, and for a lot of households the sensible configuration is a deliberate pair. Keep Elmedia for the files where its strengths are decisive — the SWF archive, the VOB rip, anything that needs a delay slider or an equalizer — and keep Total Video Player for everything that has to leave the laptop: the film for the living room, the series on the NAS, the Chromecast in the bedroom, the DLNA television in a rental flat.

The two do not conflict. They keep separate preferences and separate libraries, so installing one does not disturb the other, and file associations can be split by container if you care: MKV and MTS to one, MP4 and MOV to the other. The only cost is disk space and the small mental overhead of remembering which app you opened last. For households where one person cares about audio fidelity and another just wants the episode on the television, that overhead is smaller than the alternative of converting files or moving a laptop around the house.

If you want to see the paid tiers before committing either way, the Total Video Player Pro for Mac page lays out what the Pro edition adds, and the product page has the full feature list for the standard edition described here. Both are one purchase at the App Store rather than a tier matrix, which is the part most people are trying to simplify when they start searching for an alternative in the first place.

Frequently Asked Questions About Elmedia Alternatives on Mac

Is there an Elmedia alternative for Mac that does not cap casting?

Yes. Total Video Player for Mac casts over AirPlay, Chromecast, and DLNA as part of the app rather than as an upgrade, so there is no session clock and no five-minute allowance to run into. Elmedia's own edition comparison states that the standard build streams for five minutes only and that unlimited streaming requires the PRO upgrade, which is the specific limitation most people are trying to escape when they search for an alternative.

Why does Elmedia stop streaming to my TV after a few minutes?

That behaviour matches the developer's documented edition limits rather than a fault: the standard build of Elmedia allows five minutes of streaming to AirPlay, Chromecast, and DLNA devices, and unlimited streaming is listed as a PRO feature. Before assuming that is the cause, rule out the receiver side as well by testing the same file on a second device, because a television that drops its network connection mid-stream can look identical from the sofa.

Does Total Video Player for Mac cast to Chromecast and DLNA like Elmedia does?

Yes, and it adds a server. It casts to AirPlay devices, Chromecast and Google Cast devices, and DLNA renderers, and it also runs a DLNA Media Server so a television can browse the Mac as a source with its own remote. What it does not document is Roku output, which Elmedia does list, so if a Roku is the screen in your house that is a genuine reason to keep both apps installed.

Which app is better for subtitles on Mac?

They are good at different things. Elmedia documents font, encoding, colour, and position controls for a single track, a subtitle delay slider, OpenSubtitles search, and PRO-only saving of found tracks, which is the stronger toolkit for repairing awkward subtitle files. Total Video Player for Mac documents two tracks rendered at once with independent font, size, colour, and position per track, which is the stronger setup for language learning or a household watching with two languages on screen.

Can Total Video Player for Mac read files from my NAS without copying them?

Yes. It plays directly from SMB, NFS, SFTP, FTP, and WebDAV shares, so a file stays where it lives and is decoded over the network instead of being copied to the Mac first. Elmedia's feature pages document local files, its library, and an Open Online Video route for web sources, but do not document browsing those network shares inside the player, so a NAS household usually ends up mounting the share in Finder or copying the file down.

Does an Elmedia alternative still handle 4K HEVC in hardware on a Mac?

Total Video Player for Mac decodes 4K UHD H.264 and H.265 in hardware on Apple Silicon, so HEVC playback stays on the efficient path instead of loading the CPU. Files outside what the media engine supports — 4:2:2 chroma, 12-bit intermediates, some intra-only camera formats — fall back to software decoding in any player, including this one. If a file stutters, watch Activity Monitor during playback: a few dozen percent means hardware decode, several hundred percent means software.

Can I keep Elmedia Player installed and use both apps on a Mac?

Yes, and for many people that is the best arrangement. Elmedia is a better fit for SWF and VOB files, subtitle delay work, equalizer settings, and Roku output, while Total Video Player is a better fit for anything that has to reach a Chromecast, a DLNA television, or a NAS library. The apps keep separate preferences and libraries, so installing one does not change the other's behaviour, and file associations can be split by container if you prefer each format to open in a particular app.

Is Total Video Player for Mac a drop-in replacement for Elmedia PRO?

It replaces the delivery half of the job, not every feature. Local 4K playback, network sources, dual subtitles, playlists, speed up to ten times, A-B loop, rotate and mirror, screenshot capture, and casting to AirPlay, Chromecast, and DLNA plus a media server are all covered in one app. The equalizer, audio delay, video tuner, deinterlacing, subtitle delay and encoding controls, OpenSubtitles search, picture-in-picture, Roku output, and AirPlay reception are not, so if those are why you chose Elmedia, keep it rather than replace it.

Pick the Player That Finishes the Job on Mac

Elmedia Player and Total Video Player for Mac are both serious Mac apps, and the choice between them is not about quality. It is about where the file has to go and what has to happen on the way. Elmedia is built to open almost anything and give you fine control over how it sounds and looks, with a subtitle toolkit that can rescue files other players mangle, and its PRO edition casts to more kinds of screen than most rivals, Roku included. Total Video Player for Mac is built to move a file from wherever it lives to whichever screen will take it, with hardware 4K decoding in between, and it covers the three cast protocols plus a DLNA server that a living-room television usually needs — without a licence tier standing between you and the cast button.

The rest of the feature set exists to keep that journey short: playlists so a series behaves like a series, playback speed up to ten times for lectures and interviews, A-B loop for a passage you want to hear twice, rotate and mirror for footage that was shot sideways, dual subtitles with per-track font and colour, screenshot capture that saves the frame you paused on, and network playback over SMB, NFS, SFTP, FTP, and WebDAV so nothing has to be copied first. Casting runs over AirPlay, Chromecast, and DLNA, and the DLNA Media Server lets the television browse the Mac directly when casting from the laptop is the wrong shape for the evening. The positioning sums it up: play locally, stream from your network, cast to the big screen.

If you are still deciding, install the app, run the five checks above with your own files, and give it one evening with the television you actually own. That test will tell you more than any comparison table, including this one — and if Elmedia keeps a place on your Mac for its equalizer or its subtitle delay slider, that is a sensible outcome too. The goal was never to win an argument; it was to stop watching a five-minute countdown in the middle of a film.

Elmedia Alternative for Mac: Play Local Video and Cast It

Total Video Player for Mac plays 4K UHD H.264 and H.265 in hardware on Apple Silicon, reads files from SMB, NFS, SFTP, FTP, and WebDAV, keeps two subtitle tracks on screen with independent styling, and casts to AirPlay, Chromecast, and DLNA — with a DLNA Media Server built in. On the Mac App Store.